Explore performance details, construction highlights, applications, and technical information in one clear overview.
PH6/CP-1F is an inductive proximity sensor for metal-target detection. The output is PNP. The supply is 10…30 VDC. Its mechanical construction follows the product configuration.
The sensing characteristics are defined by the product type and the technical values associated with this model.
The listed sensing parameters describe the operating characteristics of the device without adding unsupported values.
The supply is 10…30 VDC. The output is PNP. The output is 200 mA max. The output is NO/NC.
The supply of 10…30 VDC defines the required operating voltage. The PNP output defines the switching or signal arrangement.
Protection is rated IP67.
Protection is rated IP67.
The intended application is Non-contact metal detection.
The sensor type is Inductive proximity sensor. The output is PNP. The output is NO/NC. The supply is 10…30 VDC. The output is 200 mA max. Protection is rated IP67. The status is LED. The intended application is Non-contact metal detection.
PH6/CP-1F combines the inductive proximity sensor characteristics given in the product specification. The sensor type is Inductive proximity sensor. The output is PNP. The supply is 10…30 VDC. Protection is rated IP67. The intended application is Non-contact metal detection. These technical values describe the sensing, electrical and mechanical properties of PH6/CP-1F.
| Specification | Value |
|---|---|
| Model | PH6/CP-1F |
| Sensor type | Inductive proximity sensor |
| Output | PNP |
| Logic | NO/NC |
| Supply | 10…30 VDC |
| Output current | 200 mA max. |
| Protection | IP67 |
| Status | LED |
| Application | Non-contact metal detection |
Browse product families and jump into the exact catalog section you need.