The IF6012 IFA4004-CNKG/US-104-DNA is an IFM inductive proximity sensor designed for reliable non-contact detection of metallic objects in industrial automation applications. It features a compact M18 threaded housing, 4 mm sensing range, PNP normally-open output, 10–36 V DC operation and IP67 protection.
Explore performance details, construction highlights, applications, and technical information in one clear overview.
The IF6012 IFA4004-CNKG/US-104-DNA inductive sensor by IFM is designed for dependable non-contact detection of metallic objects in industrial machinery, factory automation and machine-control applications. Using inductive sensing technology, the sensor can detect suitable metal targets without direct physical contact, making it suitable for repetitive detection and monitoring tasks.
The sensor provides a 4 mm nominal sensing range, allowing it to detect metallic machine parts, workpieces, fixtures and other suitable targets within a defined sensing zone. Its non-contact operating principle helps reduce mechanical wear compared with conventional mechanical limit switches and supports consistent detection in automated processes.
The IF6012 uses a DC PNP normally-open output and is designed for integration with compatible PLCs, controllers and industrial automation systems. It operates from a 10–36 V DC supply, making it suitable for common industrial control applications.
The sensor is built with a compact M18 × 1 threaded cylindrical housing, allowing secure mechanical installation on machinery, brackets and industrial equipment. Its construction makes it suitable for use in production machinery, material-handling systems, automated assembly equipment and other factory automation applications.
With a switching output designed for reliable industrial sensing, the IF6012 can be used to monitor the presence, position and movement of metallic objects. It can provide valuable feedback to automation systems for controlling machine sequences, verifying component positions and monitoring production processes.
The sensor is suitable for businesses looking for Industrial Sensors, Proximity Sensors, Industrial Sensors Supplier UAE, Proximity Sensors Supplier UAE and Sensor Supplier UAE solutions for industrial automation and equipment applications.
• IFM IF6012 inductive proximity sensor
• Model: IFA4004-CNKG/US-104-DNA
• Non-contact metal detection
• 4 mm sensing range
• DC PNP electrical design
• Normally-open output
• 10–36 V DC operating voltage
• M18 × 1 threaded housing
• Suitable for industrial automation
• Reliable machine position monitoring
• Suitable for metallic object detection
• Compatible with suitable PLC and control systems
• Robust industrial construction
• IP67 protection rating
The IF6012 operates using the inductive proximity sensing principle. The sensor generates an electromagnetic sensing field at its detection face. When a suitable metallic target enters the sensing range, the sensor detects the change and switches its output.
This allows the sensor to monitor metallic objects without physical contact. The switching signal can then be sent to a compatible PLC, machine controller or industrial automation system.
The non-contact design makes the IF6012 suitable for repetitive industrial operations involving:
The IF6012 features an M18 × 1 threaded cylindrical housing, providing a practical installation method for industrial machinery and automation equipment.
The threaded construction allows the sensor to be mounted using suitable mounting hardware and adjusted to achieve the required sensing position. This makes it useful for machine builders, system integrators and Industrial automation companies in UAE developing automated equipment.
The compact cylindrical format also allows the sensor to be integrated into machine frames, brackets and custom automation fixtures.
The sensor features a PNP normally-open output, allowing it to provide a switching signal when a suitable metallic target is detected.
This output configuration can be connected to compatible industrial control systems, including PLC inputs and machine controllers.
Typical applications include:
With a 4 mm sensing range, the IF6012 is designed for detecting metallic targets positioned within its specified operating range.
The sensor can be used to monitor a variety of metal components depending on target material, size, geometry and installation conditions. Actual sensing performance may vary based on the characteristics of the target material and the sensor mounting arrangement.
Correct installation and suitable sensing clearance are important for achieving reliable operation in industrial applications.
The IF6012 can be integrated into a wide range of Industrial Automation Solutions in UAE.
The sensor can detect metallic machine parts, slides and moving components to provide position information to the control system.
It can monitor whether a metallic component is present or absent at a specific location within an automated machine.
The IF6012 can be installed along conveyor lines to detect suitable metallic objects passing through a defined sensing point.
The sensor can provide feedback during automated assembly operations by verifying the position or presence of metallic components.
It can support automated production processes by detecting workpieces and machine components at key stages of operation.
The sensor can be used in suitable material-transfer and handling systems where non-contact detection of metallic objects is required.
The IF6012 can form part of larger Industrial Automation Systems in UAE, supplying proximity feedback to compatible PLCs and machine-control systems.
It can be integrated alongside other Industrial Automation Components UAE, such as:
For Industrial Automation Suppliers UAE, the IF6012 is a useful sensing component for machine builders, manufacturing facilities and automation system integrators.
The IF6012 can be included as part of an Industrial Equipment & Supplies in UAE portfolio for industrial automation and electrical applications.
It supports machinery and production systems requiring reliable metal detection and can complement a broader range of Industrial Electrical Equipment, Electrical Products in UAE and automation components.
Its application can extend across manufacturing equipment, packaging machinery, conveyors, automated assembly systems and factory machinery.
The IF6012 is suitable for customers looking for an Industrial Sensors Supplier UAE offering reliable inductive sensing technology for industrial machinery.
It is also relevant for searches including:
The sensor provides a practical solution for new machine installations and suitable replacement applications where a PNP inductive proximity sensor is required.
The IF6012 is designed for industrial applications requiring dependable sensor performance.
The IF6012 IFA4004-CNKG/US-104-DNA is a practical IFM inductive proximity sensor for reliable metallic object detection in industrial automation. Its 4 mm sensing range, PNP normally-open output, 10–36 V DC operating range, M18 threaded housing and IP67 protection make it suitable for machine position sensing, component detection, conveyor systems and factory automation.
| Feature | Specification |
| Product Code | IF6012 |
| Manufacturer | IFM |
| Model / Part Number | IFA4004-CNKG/US-104-DNA |
| Product Type | Inductive Sensor |
| Sensor Type | Inductive / Proximity Sensor |
| Detection Principle | Inductive |
| Target Material | Metallic Objects |
| Electrical Design | DC PNP |
| Output Function | Normally Open (NO) |
| Operating Voltage | 10–36 V DC |
| Nominal Supply Voltage | 24 V DC |
| Nominal Sensing Range | 4 mm |
Browse product families and jump into the exact catalog section you need.