Product Overview

HY-ER3 is a Hanyoung NUX level switch component associated with an electrode-holder arrangement for water-tank and reservoir level control. The available product information references E1, an FS-3A power/control arrangement and 220 V a.c. 50/60 Hz conditions, together with NO and NC contact designations.

The same material identifies an E3 water tank, reservoir and pump context, indicating a level-control arrangement in which the electrode-holder component is used with the associated pump circuit. The exact electrical and mechanical arrangement should follow the configuration used with the corresponding level-control equipment.

Key Features

HY-ER3 is identified with an electrode-holder and water-tank level-control context. The available details include E1, FS-3A, 220 V a.c 50/60 Hz, NO/NC contact references, an E3 water tank and a reservoir.

Key details include:

• E: E1
• FS-3A POWER COM 220 V a.c NO 50/60 Hz NC 전극홀더 (HY-ER3): (모터정지) 모터가동)
• E3 배수조: 저수지
• Pump Wate: E3 Water tank r Supplier
• 220 V a.c 8: V a.c
• Pump E3 Water tank: Reservoir
• [Unit: mm]

Technical Characteristics

The electrical information associated with the level-control arrangement includes 220 V a.c. and 50/60 Hz. The FS-3A reference is shown with NO and NC designations, providing the contact terminology used in the associated control arrangement.

The remaining product information is focused on the electrode-holder and tank/reservoir configuration rather than a larger set of numerical specifications. For ordering, the exact associated model and circuit arrangement should therefore be checked against the installation drawing.

Design and Construction

HY-ER3 is referenced as an electrode-holder component, so the physical arrangement is tied to the level-sensing assembly rather than being described as a standalone panel device. The source material also references an E3 water tank and reservoir, giving the installation context for the component.

Because the available dimensional information is not expressed as a structured mechanical specification, the installation should use the applicable holder, electrode and tank arrangement shown for the associated level-control system.

Integration and Operation

Integration of HY-ER3 is associated with level detection and pump control. The product information connects the electrode-holder with FS-3A and identifies 220 V a.c. 50/60 Hz together with NO/NC contact references. The same arrangement references pump operation and an E3 water tank/reservoir.

For installation, the electrode-holder should be connected according to the associated level-control circuit and the exact contact arrangement used by the system. The electrical supply and switching arrangement should be confirmed before commissioning.

Selection and Use

Select HY-ER3 as part of the corresponding level-control configuration, confirming the electrode-holder arrangement, associated FS-3A equipment and 220 V a.c. 50/60 Hz electrical conditions shown in the product information.

Before installation, verify the tank or reservoir arrangement and the NO/NC control configuration used with the pump circuit. Keeping the holder, electrode, power/control unit and switching arrangement matched provides the correct basis for use of HY-ER3 within the documented system context.

For procurement and installation planning, HY-ER3 should be considered together with the associated electrode-holder, level-control equipment and pump arrangement. The electrical designation shown with the configuration should be checked against the control panel before wiring, and the tank or reservoir arrangement should be confirmed before commissioning. Because the available product information is focused on the associated level-control arrangement rather than a large set of standalone dimensions, the installation drawing and the exact connected equipment remain important references for the final setup.