Product Overview

PL-D2B is a Hanyoung NUX photoelectric sensor for non-contact detection and machine sensing. The configuration is defined by its sensing method, sensing range, output arrangement and electrical requirements, with model information of PL-D2B. Sensing method: Distance - settable; Sensing distance: 0.2 ~ 2 m; Hysteresis: Less than 10% of the sensing distance; Control output: • NPN / PNP open collector asynchronously • Load current : max. 150 ㎃ d.c. (resistive load) • NPN residual voltage : max. 1 V d.c. • PNP residual voltage : max. 2 V d.c..

The sensing distance, target object, response time, output type and environmental limits are the key details to compare when selecting the sensor for a specific machine or detection point. Light source (wavelength): Infrared LED (880 nm); LED Indicator: • Control out display : Red LED • Stability display: Green LED; • Control out display: Red LED • Stability display: Green LED; Operation mode: Light ON / Dark ON ※ Selectable by the mode V/R.

Key Features

Key strengths of the PL-D2B come from the combination of its functional configuration and practical installation specifications. The following characteristics highlight the values that matter most when comparing the product with equipment requirements.

Sensing distance: 0.2 ~ 2 m; Power voltage: 12 - 24 V d.c. ±10 %; Control output: • NPN / PNP open collector asynchronously • Load current : max. 150 ㎃ d.c. (resistive load) • NPN residual voltage : max. 1 V d.c. • PNP residual voltage : max. 2 V d.c.; Response time: Max. 2 ㎳.; Degree of protection: IP65 (IEC 60529).

• Sensing distance: 0.2 ~ 2 m
• Power voltage: 12 - 24 V d.c. ±10 %
• Control output: • NPN / PNP open collector asynchronously • Load current : max. 150 ㎃ d.c. (resistive load) • NPN residual voltage : max. 1 V d.c. • PNP residual voltage : max. 2 V d.c.
• Response time: Max. 2 ㎳.
• Degree of protection: IP65 (IEC 60529)
• Connection method: • Cable output type • Number of wires : 4P • Thickness : Ø 4mm • Length 2m
• Light source (wavelength): Infrared LED (880 nm)

Technical Characteristics

The PL-D2B technical profile is centred on sensing method, detection range, target characteristics, output behaviour and response time. These parameters define the sensor's operating window and electrical interface. Response time: Max. 2 ㎳.; Power voltage: 12 - 24 V d.c. ±10 %; Current consumption: Max. 30 ㎃; Protection circuit: Reverse polarity protection and output short-circuit protection.

Additional technical characteristics include Ambient temperature & humidity: • Operation : -20 ~ 60 ℃ • Storage : -25 ~ 70 ℃, 35 ~ 85 % RH (without condensation); Degree of protection: IP65 (IEC 60529); Insulation resistance: Min. 20 MΩ. (500 V d.c. Mega).

Design and Construction

The physical design of PL-D2B should be considered together with the installation environment and the available mounting or display arrangement. Material: • Case : PC • Lens : PC; • Cable output type • Number of wires: 4P • Thickness : Ø 4mm • Length 2m; Dielectric strength: 1,000 V a.c. (50/60 Hz for 1 min); Vibration resistance: 10 - 55 Hz, double amplitude : 1.5mm for 2 hours each in X. Y and Z directions..

Further construction and environmental details include Shock resistance: 500 m/s² 3 times each in X. Y and Z directions; Connection method: • Cable output type • Number of wires : 4P • Thickness : Ø 4mm • Length 2m.

Integration and Operation

Integration of PL-D2B starts with matching its sensing method, supply voltage, output type and connection method to the control system. Sensing distance: 0.2 ~ 2 m; Power voltage: 12 - 24 V d.c. ±10 %; Control output: • NPN / PNP open collector asynchronously • Load current : max. 150 ㎃ d.c. (resistive load) • NPN residual voltage : max. 1 V d.c. • PNP residual voltage : max. 2 V d.c.; Response time: Max. 2 ㎳..

Additional operating and interface details include Degree of protection: IP65 (IEC 60529); Connection method: • Cable output type • Number of wires : 4P • Thickness : Ø 4mm • Length 2m; Light source (wavelength): Infrared LED (880 nm). These values provide a practical reference for wiring, setup and normal operation within the selected configuration.

Selection and Use

Choose PL-D2B by confirming the exact model or configuration against the required operating conditions. The available model information is PL-D2B. Model: PL-D2B; Sensing distance: 0.2 ~ 2 m; Power voltage: 12 - 24 V d.c. ±10 %; Control output: • NPN / PNP open collector asynchronously • Load current : max. 150 ㎃ d.c. (resistive load) • NPN residual voltage : max. 1 V d.c. • PNP residual voltage : max. 2 V d.c..

Before installation, confirm Response time: Max. 2 ㎳.; Degree of protection: IP65 (IEC 60529); Connection method: • Cable output type • Number of wires : 4P • Thickness : Ø 4mm • Length 2m. Matching the model, electrical ratings, signal requirements, physical arrangement and environmental limits helps keep the product within its specified operating conditions.