Product Overview

QMIHD/0P-0F is a cubic photoelectric sensor for object presence and position detection. It uses through-beam as its sensing or measurement method. The specified operating range or reference distance is 30 m. The output is PNP/NPN NO/NC. The supply is 10…30 VDC. The connection is 2 m cable or 4-pin M8. The housing is Plastic cubic.

Sensing and Technical Performance

The optical mode is through-beam. The sensing distance is 30 m. Emission is infrared.

The specified value of 30 m gives the reference distance or measurement envelope for the device. The through-beam arrangement determines how the device responds to the target or measures distance.

Electrical and Interface Details

The supply is 10…30 VDC. The output is PNP/NPN NO/NC. The switching frequency is 2 kHz.

The supply of 10…30 VDC defines the required operating voltage. The PNP/NPN NO/NC output defines the switching or signal arrangement. The switching frequency is 2 kHz.

Mechanical and Environmental Characteristics

The housing is Plastic cubic. The connection is 2 m cable or 4-pin M8. Protection is rated IP67.

The Plastic cubic housing provides the specified mechanical format. The 2 m cable or 4-pin M8 connection provides the stated physical interface. Protection is rated IP67.

Key Product Features

• Sensor type: Cubic photoelectric sensor
• Optical mode: through-beam
• Nominal sensing distance: 30 m
• Emission: infrared
• Output: PNP/NPN NO/NC
• Supply voltage: 10…30 VDC
• Switching frequency: 2 kHz
• Connection: 2 m cable or 4-pin M8
• Housing: Plastic cubic
• Protection: IP67

Technical Details

The sensor type is Cubic photoelectric sensor. The optical mode is through-beam. Emission is infrared. The sensing distance is 30 m. The output is PNP/NPN NO/NC. The supply is 10…30 VDC. The switching frequency is 2 kHz. Protection is rated IP67. The connection is 2 m cable or 4-pin M8. The housing is Plastic cubic.

Technical Information

QMIHD/0P-0F combines the cubic photoelectric sensor characteristics given in the product specification. The sensor type is Cubic photoelectric sensor. The optical mode is through-beam. The sensing distance is 30 m. The output is PNP/NPN NO/NC. The supply is 10…30 VDC. The connection is 2 m cable or 4-pin M8. These technical values describe the sensing, electrical and mechanical properties of QMIHD/0P-0F.