Product Overview

PFD series is a Hanyoung NUX fiber optic sensor for non-contact detection and machine sensing. The configuration is defined by its sensing method, sensing range, output arrangement and electrical requirements, with model information of NPN | PFD-RGN | PFD-RMN. External Input: Teaching by external input signal | Teaching / Reset input; Output: Main | Control : Open collector output, 100 mA (30 V d.c. Residual voltage 1 V or less); Output action: Light On / Dark On Output NORMAL , ON DELAY, OFF DELAY, ONE Shot Time Output; Response time: 0.7 ms max | 1 ms max.

The sensing distance, target object, response time, output type and environmental limits are the key details to compare when selecting the sensor for a specific machine or detection point. Display: Digit display method; Light source (wave length): Red LED / 660 nm; Connection method: ▪DIN rail installation structure, ▪Code extended type, ▪Code length : 2 m, ▪No. of lines : 5P, ▪Thickness : Ø4 mm; Protective circuit: Built in the reversed power supply connection protective circuit and output short protective circuit.

Key Features

Key strengths of the PFD series come from the combination of its functional configuration and practical installation specifications. The following characteristics highlight the values that matter most when comparing the product with equipment requirements.

Power supply voltage: 12 - 24 V d.c. ±10 %; Response time: 0.7 ms max | 1 ms max; Light source (wave length): Red LED / 660 nm; Connection method: ▪DIN rail installation structure, ▪Code extended type, ▪Code length : 2 m, ▪No. of lines : 5P, ▪Thickness : Ø4 mm; External Input: Teaching by external input signal | Teaching / Reset input.

• Power supply voltage: 12 - 24 V d.c. ±10 %
• Response time: 0.7 ms max | 1 ms max
• Light source (wave length): Red LED / 660 nm
• Connection method: ▪DIN rail installation structure, ▪Code extended type, ▪Code length : 2 m, ▪No. of lines : 5P, ▪Thickness : Ø4 mm
• External Input: Teaching by external input signal | Teaching / Reset input
• Output: Main | Control : Open collector output, 100 mA (30 V d.c. Residual voltage 1 V or less)
• Output action: Light On / Dark On Output NORMAL , ON DELAY, OFF DELAY, ONE Shot Time Output
• ▪Output mode: N, F, C, R, K, P, Q, A 8 kinds
• Current Consumption: 50 mA max.
• Protective circuit: Built in the reversed power supply connection protective circuit and output short protective circuit

Technical Characteristics

The PFD series technical profile is centred on sensing method, detection range, target characteristics, output behaviour and response time. These parameters define the sensor's operating window and electrical interface. ▪Output mode: N, F, C, R, K, P, Q, A 8 kinds; Power supply voltage: 12 - 24 V d.c. ±10 %; Current Consumption: 50 mA max.; Ambient temperature: In opration : -10 ℃ ~ 55 ℃, In storage : -25 ℃ ~ 70 ℃ (without condensation or freezing).

Additional technical characteristics include Ambient humidity: 35 ~ 85 % RH; Vibration resistance: 10 - 55 ㎐ double amplitude 1.5 mm, for 2 hours each in X · Y · Z directions; Shock resistance: 500 m/s² 3 times each in X · Y · Z directions.

Design and Construction

The physical design of PFD series should be considered together with the installation environment and the available mounting or display arrangement. Dielectric strength: Max 1 minute in 1000 V a.c. (50 - 60 ㎐); Insulation resistance: Min 20 MΩ in 500 V d.c.; Power supply voltage: 12 - 24 V d.c. ±10 %; Response time: 0.7 ms max | 1 ms max.

Further construction and environmental details include Light source (wave length): Red LED / 660 nm; Connection method: ▪DIN rail installation structure, ▪Code extended type, ▪Code length : 2 m, ▪No. of lines : 5P, ▪Thickness : Ø4 mm; External Input: Teaching by external input signal | Teaching / Reset input.

Integration and Operation

Integration of PFD series starts with matching its sensing method, supply voltage, output type and connection method to the control system. Power supply voltage: 12 - 24 V d.c. ±10 %; Response time: 0.7 ms max | 1 ms max; Light source (wave length): Red LED / 660 nm; Connection method: ▪DIN rail installation structure, ▪Code extended type, ▪Code length : 2 m, ▪No. of lines : 5P, ▪Thickness : Ø4 mm.

Additional operating and interface details include External Input: Teaching by external input signal | Teaching / Reset input; Output: Main | Control : Open collector output, 100 mA (30 V d.c. Residual voltage 1 V or less); Output action: Light On / Dark On Output NORMAL , ON DELAY, OFF DELAY, ONE Shot Time Output. These values provide a practical reference for wiring, setup and normal operation within the selected configuration.

Selection and Use

Choose PFD series by confirming the exact model or configuration against the required operating conditions. The available model information is NPN | PFD-RGN | PFD-RMN. Model: NPN | PFD-RGN | PFD-RMN; Power supply voltage: 12 - 24 V d.c. ±10 %; Response time: 0.7 ms max | 1 ms max; Light source (wave length): Red LED / 660 nm.

Before installation, confirm Connection method: ▪DIN rail installation structure, ▪Code extended type, ▪Code length : 2 m, ▪No. of lines : 5P, ▪Thickness : Ø4 mm; External Input: Teaching by external input signal | Teaching / Reset input; Output: Main | Control : Open collector output, 100 mA (30 V d.c. Residual voltage 1 V or less). Matching the model, electrical ratings, signal requirements, physical arrangement and environmental limits helps keep the product within its specified operating conditions.