HANDGRIP HALL EFFECT - MS SERIES

The MS series is fitted with a 18” ±0.5” AWG22 • Operating Torque: 0.25Nm (2.21lbf in) wire harness. Further non-standard connec­ • Break out Torque: 0.15Nm (1.33lbf in) tors and cable options are available upon • Maximum Allowable Torque: 4.50Nm (39.83lbf in) request. • Mechanical Angle of Movement: 68° WIRE COLOR SIGNAL • Expected Life: 1 million lifecycles RED 5 VDC for analog outputs within vol­ tage range: 0 VDC to 5 VDC. MATERIALS 7options.VDC to 35 VDC for voltage regulator BLACK Ground • Body: Glass Filled Nylon BLUE X axis data • Boot: Silicone YELLOW Y axis data • Handles: Glass Filled Nylon GREEN Z axis data BLUE / WHITE Redundant X axis MOUNTING YELLOW / BLACK Redundant Y axis GREEN / BLACK Redundant Z axis ORANGE Button 1 PANEL CUT-OUT VIOLET Button 2 63.80 (2.51) Ø3.90 x 4 places GREY Button 3 (0.152) BROWN Button 4 Ø54.40 (2.14) 63.80 51.10 (2.51) (2.01) R 6.35 x 4 places 51.10 (0.25) (2.01) AXIS ORIENTATION Z + Y+ X- X+ Y- • Standard configurations feature a rubber grommet as indicated in the above drawings • An optional plastic strain relief is available and will increase under panel mounting depth by 19.05 (0.75). • Actual strain relief position may vary. 2 MS series JOYSTICKS Proportional compact hand grip controllers • non contacting Hall effect technology CAN J1939 INTERFACE

Key Features

• Storage Temperature: -40ºC to 70ºC (-40ºF to 158ºF) Sealing (IP): Up to IP68 EMC Immunity Level (V/M): IEC 61000-4-3:2006 EMC Emissions Level: IEC 61000-4-8:2009 ESD: IEC 61000-4-2:2008 Sealing (IP): Up to IP68 EMC Immunity Level (V/M): IEC
• Operating Temperature: -10 °C to +60 °C (14 °F to +140 °F)
• Options: 0.5V to 4.5V Sensor 1, 0.5V to 4.5V Sensor 2,Limiter:Slotted Horizontal,Spring Tension:Standard,Front
• Available with CAN bus J1939
• 10 million life cycles
• Compact size 1,2 and 3 axis configurations Available with J1939 CANbus Available with USB 1.1 Redundant outputs available
• 1,2 and 3 axis configurations Available with J1939 CANbus Available with USB 1.1 Redundant outputs available
• Available with J1939 CANbus Available with USB 1.1 Redundant outputs available
• Available with USB 1.1 Redundant outputs available
• One, two or three axis Analog output10 million lifecycles CAN bus J1939 and CANopen outputs available Redundant outputs available
• Analog output10 million lifecycles CAN bus J1939 and CANopen outputs available Redundant outputs available
• CAN bus J1939 and CANopen outputs available Redundant outputs available
• One, two or three axis Analog output 10 million lifecycles CAN bus J1939 and CANopen outputs available Redundant outputs available
• Analog output 10 million lifecycles CAN bus J1939 and CANopen outputs available Redundant outputs available
• 10 million lifecycles CAN bus J1939 and CANopen outputs available Redundant outputs available
• 1, 2 and 3 axis configurations
• Available with J1939 CAN bus
• Available with USB 2.0
• Aug 16, 2024 · MS Series Microminiature slide switches Main features Ultra compact size Low profile Molded-in sealed terminals Washing not recommended Stainless steel cover
• Buttons: Operator Presence Paddle,Top
• HID compliant interface
• Ultra compact size
• Low profile
• Molded-in sealed terminals
• Stainless steel cover
• Redundant outputs available
• Compact size
• Washing not recommended