Explore performance details, construction highlights, applications, and technical information in one clear overview.
The APEM Panel Switches ICP3SAD4 is a Switches and Pushbutton with documented product-specific characteristics including Insulation resistance: 1 GΩ min. at 500 VDC; Dielectric strength: 1,500 Vrms 50 HZ between terminals Front panel; Panel thickness: 1.5 mm (.059) min. 4 mm (.157 max.).
The Panel Switches ICP3SAD4 is a Switches and Pushbutton. The overview below is based on the verified product information available for this model.
Selection should be based on the required operating conditions, configuration and application requirements. Exact technical values should be confirmed from current manufacturer documentation where necessary.
Consider the required function, operating conditions, installation arrangement, connections and application-specific requirements before final selection.
| Feature | Specification |
|---|---|
| Insulation resistance | 1 GΩ min. at 500 VDC |
| Dielectric strength | 1,500 Vrms 50 HZ between terminals Front panel |
| Panel thickness | 1.5 mm (.059) min. 4 mm (.157 max.) |
| Total travel | 1.7 mm (.067)+/- 0.3 mm Typical |
| operating force | 4 N +/- 2 N Low level or mechanical life: 1,000,000 cycles |
| Torque | 1,5 Nm max. applied to nut Soldering: 320 °C max. for 3 sec Soldering: 320 °C max. for 3 sec Momentary with short case, reduced behind-panel depth Tactile feedback Flat round actuator for optional marking Glossy actuator |
| Operating temperature | -40 °C to +85 °C (-40 °F to 185 °F) |
| Max. current/voltage rating with resistive load | 5 A 28 VDC, 70,000 cycles, 0.2 A 48 VDC, 500,000 cycles, 0.5 A 48 VAC, 500,000 cycles |
| Electrical Functions | Normally Open (NO) |
| Feature | Specification |
|---|---|
| Sealing | IP67 |
The APEMPanel Switches ICP3SAD4 is presented using the documented product characteristics available for this model.
| Feature | Specification |
|---|---|
| Insulation resistance | 1 GΩ min. at 500 VDC |
| Dielectric strength | 1,500 Vrms 50 HZ between terminals Front panel |
| Panel thickness | 1.5 mm (.059) min. 4 mm (.157 max.) |
| Total travel | 1.7 mm (.067)+/- 0.3 mm Typical |
| operating force | 4 N +/- 2 N Low level or mechanical life: 1,000,000 cycles |
| Torque | 1,5 Nm max. applied to nut Soldering: 320 °C max. for 3 sec Soldering: 320 °C max. for 3 sec Momentary with short case, reduced behind-panel depth Tactile feedback Flat round actuator for optional marking Glossy actuator |
| Operating temperature | -40 °C to +85 °C (-40 °F to 185 °F) |
| Max. current/voltage rating with resistive load | 5 A 28 VDC, 70,000 cycles, 0.2 A 48 VDC, 500,000 cycles, 0.5 A 48 VAC, 500,000 cycles |
| Electrical Functions | Normally Open (NO) |
| Feature | Specification |
|---|---|
| Sealing | IP67 |
Browse product families and jump into the exact catalog section you need.