Product Overview

HY-104 is a Hanyoung NUX foot switch for manual switching and operator control. The selected configuration is defined by its rated electrical capacity, contact or pole arrangement, connection method and mechanical construction, with model information of HY-104 | HY-105N. Rated current: 10 A 250 V a.c.; Foot switch material: Aluminum; Built in switch: Micro switch (HY-P701B); Cable: 0.75 mm² x 2P, 1.5 m | 0.75 mm² x 3P, 1.5 m.

The rated load, contact structure, terminal arrangement and physical construction are the key details to verify before installation in a control circuit. .

Key Features

Key strengths of the HY-104 come from the combination of its functional configuration and practical installation specifications. The following characteristics highlight the values that matter most when comparing the product with equipment requirements.

Rated current: 10 A 250 V a.c.; Protective structure: Falling object protective cover with attached latch lever | falling object protective cover; Foot switch material: Aluminum; Built in switch: Micro switch (HY-P701B); Contact structure: C contact.

• Rated current: 10 A 250 V a.c.
• Protective structure: Falling object protective cover with attached latch lever | falling object protective cover
• Foot switch material: Aluminum
• Built in switch: Micro switch (HY-P701B)
• Contact structure: C contact
• Cable: 0.75 mm² x 2P, 1.5 m | 0.75 mm² x 3P, 1.5 m

Technical Characteristics

The main technical characteristics of HY-104 are defined by its electrical ratings, operating inputs or outputs, performance values and control or indication functions. These specifications provide the working limits for the selected configuration. Rated current: 10 A 250 V a.c.; Protective structure: Falling object protective cover with attached latch lever | falling object protective cover; Foot switch material: Aluminum; Built in switch: Micro switch (HY-P701B).

Additional technical characteristics include Contact structure: C contact; Cable: 0.75 mm² x 2P, 1.5 m | 0.75 mm² x 3P, 1.5 m.

Design and Construction

The physical design of HY-104 should be considered together with the installation environment and the available mounting or display arrangement. Rated current: 10 A 250 V a.c.; Protective structure: Falling object protective cover with attached latch lever | falling object protective cover; Foot switch material: Aluminum; Built in switch: Micro switch (HY-P701B).

Further construction and environmental details include Contact structure: C contact; Cable: 0.75 mm² x 2P, 1.5 m | 0.75 mm² x 3P, 1.5 m.

Integration and Operation

Integration of HY-104 begins with matching its connection, input or control signal and output requirements to the surrounding equipment. Rated current: 10 A 250 V a.c.; Protective structure: Falling object protective cover with attached latch lever | falling object protective cover; Foot switch material: Aluminum; Built in switch: Micro switch (HY-P701B).

Additional operating and interface details include Contact structure: C contact; Cable: 0.75 mm² x 2P, 1.5 m | 0.75 mm² x 3P, 1.5 m. These values provide a practical reference for wiring, setup and normal operation within the selected configuration.

Selection and Use

Choose HY-104 by confirming the exact model or configuration against the required operating conditions. The available model information is HY-104 | HY-105N. Model: HY-104 | HY-105N; Rated current: 10 A 250 V a.c.; Protective structure: Falling object protective cover with attached latch lever | falling object protective cover; Foot switch material: Aluminum.

Before installation, confirm Built in switch: Micro switch (HY-P701B); Contact structure: C contact; Cable: 0.75 mm² x 2P, 1.5 m | 0.75 mm² x 3P, 1.5 m. Matching the model, electrical ratings, signal requirements, physical arrangement and environmental limits helps keep the product within its specified operating conditions.