The E12452 mounting sleeve is designed for mechanical fixing and positioning within compatible industrial automation assemblies. It features an M12 fixing configuration together with an end-stop arrangement. The coated construction specified in the product name provides a defined surface treatment for the component. The end stop helps establish a repeatable mounting position when used with the intended assembly. Exact dimensions, material grade, and mechanical load ratings should be verified from the manufacturer documentation.
Explore performance details, construction highlights, applications, and technical information in one clear overview.
The mounting sleeve incorporates an M12 fixing configuration and an integrated end stop. Its coated finish is part of the listed product configuration. The end-stop design can provide a physical reference during installation and help control mounting depth. Correct mating dimensions are essential for safe and accurate installation. The sleeve should only be used with compatible components and approved mounting arrangements.
The E12452 provides a mechanical interface for mounting compatible industrial components. The M12 configuration identifies the fixing size used by the sleeve. The end stop supports repeatable positioning during assembly. Reliable performance depends on correct thread engagement, alignment, tightening, and applied mechanical loads. The sleeve should not be substituted with an unverified visually similar component.
Before installation, verify the M12 thread and mating component dimensions. The mounting surfaces should be clean and free from debris. The sleeve should be aligned correctly and tightened according to the applicable assembly procedure. Periodic inspection should check for loosening, thread wear, coating damage, and corrosion. Replacement should use the exact product code or an approved engineering equivalent.
M12 fixing configuration
Integrated end stop
Coated construction
Mechanical mounting accessory
Repeatable positioning feature
Industrial automation application
Compact mounting format
Product-specific fixing design
Supports accurate component positioning
Simplifies mechanical installation
Provides repeatable mounting depth
Supports organized machine construction
Helps maintain stable mounting
Reduces installation variation
Supports maintenance replacement
Suitable for industrial assemblies
The E12452 is suitable for mounting compatible sensors and automation components on industrial machinery. It can be used in machine assembly, automation equipment, control systems, and retrofit projects. The M12 configuration supports applications requiring the specified fixing interface. The end stop is useful where repeatable positioning is important. Compatibility should be checked against the complete mounting arrangement before installation.
| Parameter | Specification |
|---|---|
| Product Code | E12452 |
| Product Name | Mounting sleeve with end stop - FIXING/M12/NT/K1/COATED/END STOP |
| Product Category | Automation and Control |
| Product Type | Mounting Sleeve |
| Fixing Size | M12 |
| End Stop | Yes |
| Surface Treatment | Coated |
| Application | Mechanical Mounting |
| Function | Fixing and Positioning |
| Mounting Method | Threaded Fixing |
| Material | Not Specified |
| Coating Type | Not Specified |
| Thread Standard | Not Specified |
| Dimensions | Verify Datasheet |
| Overall Length | Not Specified |
| Inner Diameter | Not Specified |
| Outer Diameter | Not Specified |
| Load Rating | Not Specified |
| Temperature Rating | Not Specified |
| Protection Rating | Not Specified |
| Environmental Suitability | Verify Datasheet |
| Installation | Compatible Assembly |
| Maintenance | Inspection |
| Manufacturer | IFM |
| Reference | E12452 |
Browse product families and jump into the exact catalog section you need.