Product Overview

AEX Controller for Dust Collector System -BRD-40SC - BRD10000-ABB1A07MHC is a FINETEK AEX Controller for Dust Collector System configuration identified in the catalog by BRD and order code 40SC - BRD10000 - ABB1A07MHC. The source documentation describes the operating method, product configuration options and technical limits for the family. This page content is therefore centered on the actual BRD identity rather than a generic description of the FINETEK range.

Microprocessor-based sequencing and differential-pressure control for dust-collector pulse-jet valves. The listed design is intended to provide a usable process signal for integration into plant instrumentation, control, monitoring or protection systems, depending on the selected configuration.

Technical Capabilities

The supplied FineTek source material reports the following technical values for this family. Where the manufacturer shows more than one value because the range depends on model, construction, output or installation option, the complete range is retained rather than assigning one value to every variant.

• Power supply: AC100–240 V ±10%, 50/60 Hz
• Power consumption: 3 VA excluding output load
• Maximum expansion: Up to 620 control points
• Output configurations: 10 or 20 outputs on the cited AEX6 family
• Control function: Sequential solenoid/diaphragm-valve control

Design and Features

The AEX Controller for Dust Collector System family is built around the operating principle above and the configuration options documented by FINETEK. The main characteristics relevant to selection are summarized below.

• Programmable sequencing
• Differential-pressure control
• Digital display
• Pulse-jet status indication
• Expandable control architecture
• Alarm relay function

Applications

FINETEK identifies this family for applications such as those listed below. These are application areas supported by the manufacturer's published product information and are not intended as a substitute for application-specific engineering review.

• Dust collectors
• Baghouse systems
• Cement plants
• Cutting/forming equipment
• Industrial dust-control systems

Configuration and Selection

The product name, model identifier and order-code string should be checked together when selecting a specific item. Family-level values can be shared across configurations only where the source indicates that they are common; model-dependent values should be read from the corresponding configuration before purchase or installation. For this Excel row, the catalog identity is AEX Controller for Dust Collector System -BRD-40SC - BRD10000-ABB1A07MHC with order code 40SC - BRD10000 - ABB1A07MHC.

This content is written from the manufacturer information associated with the cited FINETEK family source and does not add unsupported operating values or unrelated product specifications.

Technical Highlights

The AEX Controller for Dust Collector System -BRD-40SC - BRD10000-ABB1A07MHC configuration is identified by its complete product name, model and order code. The source-aligned values below are included to make selection, specification review and system integration easier.

• Power supply: AC100–240 V ±10%, 50/60 Hz
• Power consumption: 3 VA excluding output load
• Maximum expansion: Up to 620 control points
• Output configurations: 10 or 20 outputs on the cited AEX6 family
• Control function: Sequential solenoid/diaphragm-valve control

Product Identification

Model: BRD-40SC. Order code: BRD10000-ABB1A07MHC. The complete configuration should be matched to the required process conditions, installation arrangement and connected instrumentation.