Explore performance details, construction highlights, applications, and technical information in one clear overview.
The Vacuum Pad Standard Type (Small-sized type) is a precision workpiece holding solution designed to prevent unintended drops during automated handling processes. Its primary function is to securely hold small and light workpieces while ensuring reliable release through a two-step mechanical and pneumatic system, minimizing the risk of adhesion or slippage that can occur with standard vacuum pads.
Constructed from high-performance elastomeric materials including nitrile rubber, silicone rubber, fluoro rubber, or conductive silicone rubber, the pad offers durability, chemical resistance, and consistent surface properties. The design incorporates a direct mounting structure with an integrated mechanical release mechanism to ensure reliable performance under varying operational conditions.
The vacuum pad features a direct mounting type configuration with a built-in mechanical release function. It connects directly to the vacuum system via a standard interface, where blow-off air is supplied through a dedicated valve system. The internal pin ejection mechanism activates when required for workpiece release, ensuring safe and controlled detachment.
The pad operates within a positive pressure range of 30 kPa to 0.5 MPa and a negative pressure range of -100 kPa to -30 kPa. Suction flow is rated at 4 L/min when vacuum pressure reaches -80 kPa or lower. The vacuum release valve requires an operating pressure of 30 kPa to activate the internal pin ejection, while suction air supply is triggered at -30 kPa. These values ensure precise control over both holding and release phases.
The vacuum pad is available in a standard small-sized configuration with a vacuum pad ID not specified in detail. The standalone pad holder has a diameter of φ1.6 mm, enabling compatibility with various mounting systems. No color variants are listed; the product is offered as a single standard type for consistent performance across applications.
Installation requires direct mounting onto the workpiece or fixture surface using the provided pad holder. The mechanical release function is activated by the vacuum system’s pressure control, specifically when positive pressure reaches 30 kPa to trigger pin ejection. This integration ensures that after blow-off air is released, the rod-built-in holder pushes out to secure workpiece release, preventing re-attachment or accidental blowing away of the part.
| Specification | Details |
|---|---|
| Weight | Pad size Ascending order Descending order Clear All |
| Material | Nitrile rubber, Silicone rubber, Fluoro rubber, Conductive silicone rubber |
| Type | Direct mounting type with Mechanical Release Function |
| Fluid medium | Air |
| Operating pressure range | Positive pressure: 30kPa to 0.5MPa Negative pressure: -100kPa to -30kPa |
| Operating temp. range | 0 to 60℃(No freezing) |
| Suction flow | 4L/min (*When vacuum pressure is -80 kPa or less) |
| Operating pressure of vacuum release valve to move the pin | 30kPa |
| Operating pressure of valve to supply suction air | -30kPa |
| Vacuum Pad size | Vacuum Pad I. D.* |
| Without Vacuum Pad (Pad Holder only) | φ1.6 mm |