Explore performance details, construction highlights, applications, and technical information in one clear overview.
This special Tube Fitting configuration provides unequal port combinations for distribution fittings based on PHT triple-banjo and PA twin-banjo arrangements. It is intended for piping layouts where equal-size distribution is not suitable.
The special configuration changes the distribution-port combination while retaining the compact banjo architecture. PISCO identifies configurable port counts and sizes for the distribution fitting arrangement.
The special-product description allows port numbers and sizes to be changed for distribution fittings in the 2- to 6-port range. The applicable tube and thread values depend on the selected PHT or PA model code.
Select the required port count and port-size combination from the PISCO special-product/configurator selection. Verify every connected tube size before installation because unequal-port combinations are model-specific.
| Specification | Details |
|---|---|
| Fluid medium | Air, Water (Conditional*) |
| Max. operating pressure | 1.0MPa |
| Max. vacuum | -100kPa |
| Operating temp. range | 0 to 60℃ (No freezing) |
| mm size (mm) | φ4, φ6, φ8, φ10, φ12, φ16 |
| Metric male thread | M5x0.8, M6x1 |
| Taper pipe male thread | R1/8, R1/4, R3/8, R1/2 |
| Metric female thread | M5x0.8 |
| UNF thread | 10-32UNF |
| NPT thread | NPT1/16, NPT1/8, NPT1/4, NPT3/8, NPT1/2 |
| Special series | PHT triple Banjo / PA twin Banjos |
| Port configuration | Unequal port combinations |
| Port count | 2 to 6 ports |
| Special function | Port numbers and sizes can be configured for distribution fittings |