Explore performance details, construction highlights, applications, and technical information in one clear overview.
This special PISCO fitting uses an all-resin, collet-type push-in arrangement designed to reduce fitting weight while maintaining the quick tube insertion/removal principle of a push-in connection.
The special construction centers on a POM collet and resin connection components rather than a conventional metal collet assembly. The design is intended for lightweight pneumatic plumbing and compact equipment layouts.
The PISCO fitting family supports air and conditional water service with 1.0MPa maximum operating pressure, -100kPa maximum vacuum and 0 to 60℃ operation for the corresponding general fitting platform. Exact pressure and temperature limits must follow the selected special model.
Insert the prepared tube fully to the tube end, verify retention and select the exact tube/port combination before installation. The special all-resin construction is intended where reduced fitting weight is important.
| Specification | Details |
|---|---|
| Fluid medium | Air, Water (Conditional*) |
| Max. operating pressure | 1.0MPa |
| Max. vacuum | -100kPa |
| Operating temp. range | 0 to 60℃ (No freezing) |
| mm size (mm) | φ4, φ6, φ8, φ10, φ12, φ16 |
| Metric male thread | M5x0.8, M6x1 |
| Taper pipe male thread | R1/8, R1/4, R3/8, R1/2 |
| Metric female thread | M5x0.8 |
| UNF thread | 10-32UNF |
| NPT thread | NPT1/16, NPT1/8, NPT1/4, NPT3/8, NPT1/2 |
| Construction | All-resin push-in fitting |
| Collet material | POM |
| Design characteristic | Lightweight all-resin collet construction |