The PK7533 is an IFM pressure switch designed for dependable low-pressure monitoring in industrial automation systems. It provides a 0...25 bar measuring range and intuitive adjustment of the switching point. Setting rings make commissioning and pressure-limit adjustment straightforward for operators. The compact cylindrical housing supports convenient installation in machinery and pressure circuits. IP67 protection and robust stainless-steel wetted components make it suitable for demanding industrial environments.
Explore performance details, construction highlights, applications, and technical information in one clear overview.
Pressure Measurement and Switching
The PK7533 measures pressure within a 0...25 bar range and provides a configurable switching response. Its set point can be adjusted from 1.25 to 25 bar according to application requirements. A defined hysteresis of 0.5 bar helps provide stable switching behaviour around the configured pressure point. The switch point accuracy is specified at less than ±2.5% of the final value. Repeatability is specified at less than ±0.5% under stated temperature conditions.
Intuitive Adjustment
The device uses setting rings for adjustment of the switch point. This provides a straightforward method for commissioning without requiring complicated programming procedures. Operators can directly configure the required pressure limit during installation or maintenance. The adjustment concept is useful when machines require frequent pressure-setting changes. It also helps simplify service work and reduce commissioning effort.
Robust Construction
The PK7533 features a cylindrical housing measuring approximately Ø27 mm with a length of 71.6 mm. The housing uses PBT, PC, FKM and stainless steel materials, while the wetted parts use stainless steel 316L/1.4404 and FKM. IP67 protection helps provide resistance against dust and temporary water exposure. The switch is designed for high mechanical resistance, including shock and vibration conditions. Its specified minimum pressure-cycle capability is 50 million cycles.
Industrial Applications
The PK7533 is suitable for pressure monitoring in pneumatic and hydraulic machinery. It can be used to monitor operating pressure, detect abnormal conditions and provide switching signals to control systems. Its low-pressure range is useful for applications where pressure limits are below typical high-pressure hydraulic requirements. The compact design supports installation in machine panels and pressure circuits. It can therefore be used across a wide range of industrial automation tasks.
0...25 bar measuring range
1.25...25 bar set-point range
0.5 bar hysteresis
Intuitive setting-ring adjustment
Switch point accuracy below ±2.5%
Repeatability below ±0.5%
IP67 protection
Stainless steel 316L/1.4404 wetted parts
50 million minimum pressure cycles
G 1/4 external process connection
Pneumatic pressure monitoring
Hydraulic pressure supervision
Machine pressure control
Compressor systems
Pump monitoring
Industrial automation
Pressure protection systems
Factory machinery
| Specification | Details |
|---|---|
| Product | PK7533 |
| Product type | Pressure switch |
| Model designation | PK-025-SFG14-QSPKG/US/ /W |
| Measuring range | 0...25 bar |
| Measuring range in MPa | 0...2.5 MPa |
| Set point range | 1.25...25 bar |
| Set point in MPa | 0.125...2.5 MPa |
| Hysteresis | 0.5 bar |
| Switch point accuracy | < ±2.5% final value |
| Repeatability | < ±0.5% final value |
| Characteristic deviation | < ±1.5% BFSL / < ±2.5% LS |
| Temperature drift | < ±0.5% per 10 K |
| Adjustment method | Setting rings |
| Maximum voltage drop | 2 V |
| Permanent current rating | 500 mA |
| Switching frequency | 100 Hz |
| Short-circuit protection | Yes |
| Overload protection | Yes |
| Ambient temperature | -25...80 °C |
| Storage temperature | -40...100 °C |
| Protection rating | IP67 |
| Housing dimensions | Ø27 × 71.6 mm |
| Weight | Approx. 94.2 g |
| Process connection | G 1/4 external thread |
| Internal thread | M5 |
| Wetted materials | Stainless steel 316L/1.4404, FKM |
| Tightening torque | 25 Nm |
| Minimum pressure cycles | 50 million |
| Shock resistance | 50 g, 11 ms |
| Vibration resistance | 20 g, 10...2000 Hz |