The PK6222 is an industrial pressure switch designed for pressure monitoring up to 100 bar. It provides reliable pressure-dependent switching for automation and machine-control applications. Its intuitive setting-ring mechanism simplifies adjustment of the required pressure threshold. The compact cylindrical construction and IP67 protection support dependable industrial installation. The sensor is well suited to hydraulic, pneumatic and general industrial pressure-monitoring tasks.
Explore performance details, construction highlights, applications, and technical information in one clear overview.
Pressure Measurement
The PK6222 provides a 0...100 bar measuring range for monitoring industrial pressure conditions. The switch point can be adjusted between 5 and 100 bar, while the reset point ranges from 3 to 98 bar. This allows the sensor to respond when the process reaches the required pressure threshold. The pressure-switching function can be connected to a PLC or control circuit. It provides a practical solution for decentralized pressure monitoring.
Switch-Point Setting
The pressure threshold is adjusted using setting rings. This design allows straightforward commissioning without complex programming procedures. The documented switch-point accuracy is below ±2.5% of the final value. Repeatability is below ±0.5% under specified temperature conditions. This helps maintain consistent switching behaviour during machine operation.
Robust Construction
The PK6222 uses a compact cylindrical housing with stainless-steel wetted parts. The documented dimensions are approximately Ø27 mm by 70.6 mm. Its IP67 protection rating helps protect the sensor from dust and temporary water exposure. The design is suitable for industrial environments where compact and robust pressure switching is required. The process connection is a 1/4-inch NPT external thread with M5 internal thread.
Automation Integration
The PK6222 provides a complementary PNP switching output for direct connection to industrial control systems. It supports up to 500 mA permanent switching current and has short-circuit and overload protection. The switching frequency can reach 100 Hz. These characteristics make it suitable for automated pressure monitoring and machine interlocking.
0...100 bar pressure measuring range
Intuitive setting-ring adjustment
Complementary PNP switching output
500 mA permanent current capability
IP67 protection
Stainless-steel wetted parts
Compact cylindrical housing
50 million minimum pressure cycles
Hydraulic pressure monitoring
Pneumatic equipment
Machine pressure control
Pressure limit detection
Industrial automation
Pump and compressor systems
PLC pressure monitoring
Machine interlocking applications
| Specification | PK6222 |
|---|---|
| Product type | Pressure switch |
| Model | PK6222 |
| Order code | PK-100-SFN14-HCPKG/US/ /W |
| Pressure type | Relative pressure |
| Measuring range | 0...100 bar |
| Measuring range | 0...10 MPa |
| Approx. psi range | 0...1450 psi |
| Set point SP | 5...100 bar |
| Reset point rP | 3...98 bar |
| Switch-point accuracy | < ±2.5% |
| Repeatability | < ±0.5% |
| Characteristics deviation | < ±1.5% BFSL / < ±2.5% LS |
| Temperature drift | < ±0.5% per 10 K |
| Adjustment method | Setting rings |
| Output type | Digital switching |
| Output function | Complementary PNP |
| Permanent current | 500 mA DC |
| Voltage drop | Max. 2 V |
| Switching frequency | 100 Hz |
| Short-circuit protection | Yes |
| Overload protection | Yes |
| Ambient temperature | -25...80 °C |
| Storage temperature | -40...100 °C |
| Protection rating | IP67 |
| Housing | Cylindrical |
| Dimensions | Ø27 / L 70.6 mm |
| Materials | PBT, PC, FKM, stainless steel |
| Wetted material | Stainless steel 316L / 1.4404 |
| Pressure cycles | Minimum 50 million |
| Process connection | 1/4" NPT external / M5 internal |