FINETEK Instrumentation Flow

FS700E/FS710E Dust monitoring for filter break

FS700E/FS710E Dust monitoring for filter break is a FINETEK industrial product configured for its stated model and order-code arrangement. Key source-aligned characteristics include On/off installation distance: 3 × pipe diameter; Sensor installation length: Approximately 1/3 to 2/3 of pipe diameter; Detection principle: Triboelectric particle monitoring; Mounting location: Clean-gas side downstream of filter.
  • Brand FINETEK
  • Category Instrumentation
  • Subcategory Flow
Interested in this product? FS700E/FS710E Dust monitoring for filter break
Product insights

Everything you need to evaluate this product

Explore performance details, construction highlights, applications, and technical information in one clear overview.

Quality assured Technical details Industrial use Expert support

Product Overview

FS700E/FS710E Dust monitoring for filter break is a FINETEK FS700E / FS710E Dust Monitoring for Filter Break configuration identified in the catalog by its family configuration. The source documentation describes the operating method, product configuration options and technical limits for the family. This page content is therefore centered on the actual FS700E/FS710E Dust monitoring for filter break identity rather than a generic description of the FINETEK range.

Triboelectric dust monitoring that detects particles moving through the clean-gas side to identify filter-break conditions. The listed design is intended to provide a usable process signal for integration into plant instrumentation, control, monitoring or protection systems, depending on the selected configuration.

Technical Capabilities

The supplied FineTek source material reports the following technical values for this family. Where the manufacturer shows more than one value because the range depends on model, construction, output or installation option, the complete range is retained rather than assigning one value to every variant.

  • On/off installation distance: 3 × pipe diameter
  • Sensor installation length: Approximately 1/3 to 2/3 of pipe diameter
  • Mounting location: Clean-gas side downstream of filter
  • Detection principle: Triboelectric particle monitoring

Design and Features

The FS700E / FS710E Dust Monitoring for Filter Break family is built around the operating principle above and the configuration options documented by FINETEK. The main characteristics relevant to selection are summarized below.

  • Detects filter-break dust migration
  • Probe installed through a welded threaded bush
  • Suitable for continuous filter supervision
  • Simple threshold-based monitoring

Applications

FINETEK identifies this family for applications such as those listed below. These are application areas supported by the manufacturer's published product information and are not intended as a substitute for application-specific engineering review.

  • Baghouse filter monitoring
  • Dust collectors
  • Industrial filtration
  • Process exhaust systems

Configuration and Selection

The product name, model identifier and order-code string should be checked together when selecting a specific item. Family-level values can be shared across configurations only where the source indicates that they are common; model-dependent values should be read from the corresponding configuration before purchase or installation. For this Excel row, the catalog identity is FS700E/FS710E Dust monitoring for filter break.

This content is written from the manufacturer information associated with the cited FINETEK family source and does not add unsupported operating values or unrelated product specifications.

Technical Highlights

The FS700E/FS710E Dust monitoring for filter break configuration is identified by its complete product name, model and order code. The source-aligned values below are included to make selection, specification review and system integration easier.

  • On/off installation distance: 3 × pipe diameter
  • Sensor installation length: Approximately 1/3 to 2/3 of pipe diameter
  • Detection principle: Triboelectric particle monitoring
  • Mounting location: Clean-gas side downstream of filter
SpecificationDetails
Product nameFS700E/FS710E Dust monitoring for filter break
Model / variantAs identified in product name
Order code / configurationNot separately stated in product name
On/off installation distance3 × pipe diameter
Sensor installation lengthApproximately 1/3 to 2/3 of pipe diameter
Mounting locationClean-gas side downstream of filter
Detection principleTriboelectric particle monitoring
Shop by category
Category

Browse product families and jump into the exact catalog section you need.

Product categories