NORGREN Pneumatics Filter Regulator Lubricator (FRL)

F82V-3AN-EPA

F82V-3AN-EPA is a NORGREN product configuration listed as Excelon Plus Vapour Removal Filter, 3/8" NPTFilterVapourRemoval: F82V-3AN-EPA. The description retains the exact catalogue wording so the selected model, connection details and configuration terms remain clear for product selection and comparison. Product-specific catalogue information is retained for this model.
  • Brand NORGREN
  • Category Pneumatics
  • Subcategory Filter Regulator Lubricator (FRL)
Interested in this product? Excelon Plus Vapour Removal Filter, 3/8" NPTFilterVapourRemoval: F82V-3AN-EPA
Product insights

Everything you need to evaluate this product

Explore performance details, construction highlights, applications, and technical information in one clear overview.

Quality assured Technical details Industrial use Expert support

Product Overview

F82V-3AN-EPA is listed by NORGREN as Excelon Plus Vapour Removal Filter, 3/8" NPTFilterVapourRemoval: F82V-3AN-EPA. This product entry represents the stated configuration in the catalogue and keeps the wording focused on the selected model and its listed form.

Configuration

The listed configuration is Excelon Plus Vapour Removal Filter, 3/8" NPTFilterVapourRemoval: F82V-3AN-EPA. The connection, drainage, filtration, shut-off and other configuration terms shown in the product name are retained as provided for this specific entry, without substituting values from another variant.

Product Selection

Use the complete product name, model reference and stated configuration when selecting this item. This entry is written for the exact catalogue description supplied for F82V-3AN-EPA, so the identifying configuration terms remain visible throughout the product content.

Technical Information

The technical information available in the product record is represented by the stated model and configuration: Excelon Plus Vapour Removal Filter, 3/8" NPTFilterVapourRemoval: F82V-3AN-EPA. No additional engineering values are added here beyond those explicitly present in the product identity.

Catalogue Identification

F82V-3AN-EPA corresponds to the product identity supplied in the catalogue entry. The wording is intended to help distinguish this configuration from related NORGREN products that may share the same family or general product type.

Configuration Details

The selected product remains identified by the exact listing: Excelon Plus Vapour Removal Filter, 3/8" NPTFilterVapourRemoval: F82V-3AN-EPA. These configuration terms should be retained when comparing related catalogue variants.

Product Data

The product record specifies Excelon Plus Vapour Removal Filter, 3/8" NPTFilterVapourRemoval: F82V-3AN-EPA as its listed identity. This section does not introduce technical claims beyond the supplied product wording.

Selection Reference

For ordering and catalogue selection, refer to the exact model and configuration wording: Excelon Plus Vapour Removal Filter, 3/8" NPTFilterVapourRemoval: F82V-3AN-EPA. This helps keep the chosen variant aligned with the product record.

SpecificationValue
MediumCompressed air only
Maximum Inlet PressurePolycarbonate bowl
Port SizeG1/4, G3/8, 1/4 PTF, 3/8 PTF
Port Size3/8”
Port Size1/4”
Operating TemperaturePolycarbonate bowl
MaterialsBody: Die cast aluminium
Remaining Oil Content0,003 mg/m3 max. at +21°C
Maximum Supply PressurePolycarbonate bowl: 10 bar (145 psi) Metal bowl: 17 bar (246 psi)
Remaining Oil Content0,003 mg/m3 max. at +21°C (+69°F)
Flow4 dm3/s - Maximum flow to maintain stated oil removal performance at operating pressure: 6,3 bar (91 psi)
ATEXFilters F82 are in conformity with Atex 2014/34/EU II 2 GD Ex h IIC T6 Gb EX h IIIC T85°C Db
Operating TemperaturePolycarbonate bowl: -10 ... +60°C (+14 ... +140°F) Metal bowl: -20 ... +65°C (-4 ... +149°F) Air supply must be dry enough to avoid ice formation at temperatures below +2°C (+35°F). Note: Install an F82C coalescing
MaterialsBody: Die cast aluminium Body covers: ABS Transparent Bowl: Polycarbonate with Polypropylene Guard. Metal Bowl: Die cast Zinc with PA liquid level indicator lens Bowl ‘o'- ring: Chloroprene Elastomers: NBR
MediaCompressed air
Port Size3/8" PTF
Drain TypeClosed bowl
Bowl MaterialPolycarbonate (PC)
Operating Temperature-10 ... 60 °C, -4 ... 140 °F
Maximum Inlet Pressure10 bar, 145 psi
Flow4 dm3/s, 8 scfm
Materials - BodyAluminum alloy
Materials - BowlPolycarbonate (PC)
Materials - ElastomersNitrile rubber (NBR)
Materials - Filter ElementActivated carbon
Dimensions - Height165 mm
Dimensions - Length52 mm
Dimensions - Width47 mm
Weight0.21 kg
Country of OriginMexico
RangeF82V
Shop by category
Category

Browse product families and jump into the exact catalog section you need.

Product categories