IFM E30482 is a screw-in adapter designed for installing compatible process sensors in containers and pipes. It provides a G 1/2 sensor connection with a sealing cone and a G 3/4 process connection. The adapter is manufactured from stainless steel 1.4404 / 316L and features wetted surface roughness of Ra < 0.4 µm / Rz = 4 µm. The sealing arrangement includes an FKM sealing ring and an O-ring 18.5 × 1 mm. It has a pressure rating of 25 bar and weighs approximately 126 g. The adapter is supplied individually and is suitable for process sensor installations requiring a hygienic stainless-steel connection.
Explore performance details, construction highlights, applications, and technical information in one clear overview.
E30482 provides a mechanical interface for installing compatible process sensors into containers and pipes. The adapter connects a G 1/2 sensor connection to a G 3/4 process connection. This allows sensors to be integrated into process systems where the available connection uses a different thread size. The screw-in arrangement provides a secure connection when correctly installed. It is suitable for industrial process measurement applications.
The sensor side uses a G 1/2 sealing cone connection. The adapter incorporates a defined sealing arrangement to help prevent leakage between the sensor and process connection. An FKM sealing ring and 18.5 × 1 mm O-ring are included as part of the sealing design. Correct installation and clean mating surfaces are important for reliable sealing. Damaged sealing elements should be replaced during maintenance.
E30482 is manufactured from stainless steel 1.4404 / 316L. This material is widely used in industrial and hygienic process applications because of its corrosion resistance and robust mechanical properties. The wetted surface has a specified roughness of Ra < 0.4 µm / Rz = 4 µm. This smooth surface finish supports suitable process installation requirements. Material compatibility with the process medium should always be verified before use.
The adapter has a pressure rating of 25 bar. This rating makes it suitable for compatible process applications operating within the specified pressure limit. The pressure rating applies to the adapter and should not be considered higher than the rating of the complete sensor installation. Proper sealing and tightening are essential for maintaining process integrity. The operating conditions must be evaluated for pressure, temperature and process medium.
Screw-in adapter for process sensors
G 1/2 sensor connection
G 3/4 process connection
Sealing cone design
FKM sealing ring
18.5 × 1 mm O-ring
Stainless steel 1.4404 / 316L
25 bar pressure rating
Smooth wetted surface finish
Approx. 126 g weight
Process sensor installation
Container measurement
Pipe-mounted sensors
Pressure measurement
Industrial process systems
Fluid handling equipment
Process automation
Hygienic industrial installations
| Specification | Details |
|---|---|
| Product Code | E30482 |
| Product Type | Screw-in Adapter |
| Product Designation | ADAPT G1/2-G3/4 KONUS/O-RG |
| Sensor Connection | G 1/2 |
| Process Connection | G 3/4 |
| Connection Type | Sealing cone / threaded |
| Pressure Rating | 25 bar |
| Material | Stainless steel 1.4404 / 316L |
| O-Ring | 18.5 × 1 mm |
| O-Ring Material | FKM |
| Additional Seal | FKM sealing ring |
| Wetted Surface Roughness | Ra < 0.4 µm / Rz = 4 µm |
| Weight | Approx. 126 g |
| Pack Quantity | 1 pc. |
| Main Application | Containers and pipes |