The IFM E30149 is a D60 welding adapter designed for process sensors with a G1 Aseptoflex Vario connection. It incorporates a dedicated leak port and is recommended for thin process walls up to 3 mm. The adapter is manufactured from 316L stainless steel with a smooth surface finish. It supports a pressure rating of 25 bar and is suitable for industrial and hygienic applications.
Explore performance details, construction highlights, applications, and technical information in one clear overview.
The E30149 provides a G1 internal thread for compatible Aseptoflex Vario process sensors. This creates a defined connection between the welded adapter and the sensor. The threaded interface supports secure sensor installation. Correct sealing and installation procedures should be followed.
A key feature of the E30149 is its integrated leakage port. This allows potential seal failure to be detected through the designated leak path. Such a design is useful where process leakage monitoring is important. It adds an additional level of connection integrity monitoring.
The wetted components use stainless steel 1.4435 / 316L. The surface characteristic is specified as Ra <0.4 µm / Rz 4 µm. This smooth finish is appropriate for suitable hygienic process installations. The robust stainless-steel body also supports demanding industrial environments.
The E30149 is specifically recommended for process wall thicknesses up to 3 mm. It is designed as a welding adapter for thin-wall applications. For thicker walls, IFM recommends selecting a more suitable welding adapter. Welding should be performed using the appropriate installation accessories.
The adapter is supplied with EPDM and FKM O-rings. Both listed seals are 24 × 2 mm, and the supplied versions are FDA compliant. Compatible welding and leak-testing accessories are also available. This provides flexibility during hygienic installation and maintenance.
D60 welding adapter
G1 Aseptoflex Vario internal thread
Integrated leak port
25 bar pressure rating
316L stainless steel
Smooth Ra <0.4 µm surface
Suitable for wall thickness up to 3 mm
EPDM and FKM O-rings supplied
Hygienic process equipment
Food and beverage systems
Process vessels
Thin-wall tanks
Industrial pipelines
Pressure and process sensor installation
| Specification | Details |
|---|---|
| Product Code | E30149 |
| Product Type | Welding Adapter for Process Sensors |
| Designation | WELDING ADAPT D60/G1 LEAK PORT |
| Adapter Type | Welding adapter |
| Welding Diameter | 60 mm |
| Sensor Connection | G1 internal thread |
| Connection System | Aseptoflex Vario |
| Leak Detection | Integrated leakage port |
| Pressure Rating | 25 bar |
| Maximum Pressure | 2.5 MPa |
| Recommended Wall Thickness | ≤3 mm |
| Wetted Material | Stainless steel |
| Material Grade | 1.4435 / 316L |
| Surface Roughness | Ra <0.4 µm |
| Surface Profile | Rz 4 µm |
| Supplied O-Ring 1 | 24 × 2 mm EPDM |
| EPDM Compliance | FDA compliant |
| Supplied O-Ring 2 | 24 × 2 mm FKM |
| FKM Compliance | FDA compliant |
| Welding Mandrel | E30452 |
| Water-Cooled Welding Mandrel | E30532 |
| Leak-Test Accessory | E30530 |
| Grinding Protection | E30160 |
| Weight | Approx. 156–158 g |
| Pack Quantity | 1 piece |
| Brand | IFM |