Explore performance details, construction highlights, applications, and technical information in one clear overview.
The Vacuum Generator VC series ejector is a direct-mount solution designed to remove air from the mold cavity during part production. By using compressed air to create a vacuum, it enables workpieces to be securely picked up and transferred with precision when paired with vacuum pads. This essential component ensures efficient degassing, reducing internal voids and improving part quality in injection molding processes.
The ejector is constructed from high-performance materials optimized for durability and reliability. The main resin components are made from PBT, a standard engineering plastic suitable for general industrial environments. Critical metal parts feature brass with electroless nickel plating, offering excellent corrosion resistance and wear performance. Seal rubber elements use NBR, a common sealing material known for its flexibility and cost-effectiveness, though it has limited ozone resistance.
The ejector connects directly to the vacuum pad holder via a secure mechanical interface. It is designed as a direct mount, allowing for simple integration into existing mold systems without requiring additional mounting brackets or complex fittings. This configuration ensures stable alignment and efficient transfer of vacuum pressure from the generator to the workpiece.
The unit operates with air as the fluid medium within an operating pressure range of 0.15 to 0.7 MPa. The rated supply pressure is 0.5 MPa for H and L types, and 0.35 MPa for E type models. It functions reliably across a temperature range of 0 to 60°C, with no freezing capability. No copper-based metallic materials are used in flow paths, ensuring compatibility with certain chemical environments.
Available in multiple sizes to suit different mold requirements, the ejector offers metric diameters of φ3, φ4, φ6, φ8, φ10 and φ8, φ12. Inch sizes include φ1/4", φ5/16", and φ3/8". Thread options include M5x0.8, M6x1 for metric threads; R1/8, R1/4, R3/8 for tapered male threads; and NPT1/8, NPT1/4, NPT3/8 for NPT connections. Selection depends on the specific mold design and mounting constraints.
The ejector is designed for direct integration into existing vacuum systems. It mounts directly onto the vacuum pad holder using standard threaded interfaces such as M5x0.8, M6x1, R1/8, R1/4, R3/8, or NPT1/8, NPT1/4, NPT3/8 threads. This straightforward installation method ensures compatibility with a wide range of mold configurations and simplifies setup in production lines.
| Specification | Details |
|---|---|
| Fluid medium | Air |
| Operating pressure range | 0.15 to 0.7 MPa |
| Rated supply pressure | 0.5 MPa (H, L type)/0.35 MPa (E type) |
| Operating temperature range | 0 to 60°C (No freezing) |
| Metric male thread | M5x0.8, M6x1 |
| Taper male thread | R1/8, R1/4, R3/8 |
| NPT male thread | NPT1/8, NPT1/4, NPT3/8 |
| Metric size (mm) | φ3, φ4, φ6, φ8, φ10 | φ8, φ12 |
| Inch size | φ1/4", φ5/16", φ3/8" |
| Main resin material | PBT |
| Main metal material | Brass with electroless nickel plating |
| Material restriction | No copper-based metallic material is used in flow paths |