KOGANEI Pneumatic Components Electric Actuator

Blow Type - Low Dust Emission Type (ELK series)

Blow Type - Low Dust Emission Type (ELK series) is a blow-type ionizer for removing static charge from workpieces and process areas. Key documented characteristics include Power supply: 24VDC ±5%; Consumption current: Approximately 70 mA; Output voltage: Approximately 2 (high-frequency type) kV; Ion balance: Within ±15 (standard nozzle; 50 mm [2 in.] from nozzle tip; supply air pressure: 0.3 MPa [44 psi.]). The design supports discharge needle assembly is designed for straightforward removal and cleaning; low-air-consumption variants are suited to applications where compressed-air use must be controlled.
  • Brand KOGANEI
  • Category Pneumatic Components
  • Subcategory Electric Actuator
Interested in this product? Blow Type - Low Dust Emission Type (ELK series)
Product insights

Everything you need to evaluate this product

Explore performance details, construction highlights, applications, and technical information in one clear overview.

Quality assured Technical details Industrial use Expert support

Blow Type - Low Dust Emission Type (ELK series)

Blow Type - Low Dust Emission Type (ELK series) is a KOGANEI blow-type ionizer for removing static charge from workpieces and process areas. Its model designation identifies the selected version and should be retained for purchasing, installation and replacement so the same functional and connection characteristics are maintained.

Product Overview

The Blow Type - Low Dust Emission Type (ELK series) is intended for static-charge removal. The principal documented characteristics are Power supply: 24VDC ±5%; Consumption current: Approximately 70 mA; Output voltage: Approximately 2 (high-frequency type) kV; Ion balance: Within ±15 (standard nozzle; 50 mm [2 in.] from nozzle tip; supply air pressure: 0.3 MPa [44 psi.]); Medium: clean air, water vapor and oil removed. These characteristics provide the practical starting point for matching the component to the machine architecture, required motion or switching function and available installation space.

Key Product Benefits

  • Discharge needle assembly is designed for straightforward removal and cleaning
  • Low-air-consumption variants are suited to applications where compressed-air use must be controlled
  • KOGANEI specifies ion-balance and ozone-generation performance for controlled operation

Design and Integration Advantages

The combination of the product construction, available mounting or control characteristics and the selected model code can simplify integration into automated equipment. The exact connection, electrical and mechanical requirements should be checked against the installation before commissioning.

Typical Applications

  • Static-charge removal
  • Pneumatic blow-off applications
  • Clean manufacturing processes

Application Fit

This type of component is useful where repeatable pneumatic motion, switching or automated handling is required. Application selection should consider the required cycle, load, stroke or switching function, available space and the operating conditions of the machine.

Performance and Technical Characteristics

The technical characteristics below are the main selection points identified for this product. They should be evaluated together because the correct model depends on the complete mechanical, pneumatic and electrical requirements of the equipment.

Technical Selection Points

Power supply24VDC ±5%
Consumption currentApproximately 70 mA
Output voltageApproximately 2 (high-frequency type) kV
Ion balanceWithin ±15 (standard nozzle; 50 mm [2 in.] from nozzle tip; supply air pressure: 0.3 MPa [44 psi.])
Mediumclean air, water vapor and oil removed
Operating air pressure range0.05~0.5 [7~73] MPa [psi]
Mass60 [2.12] g

Installation and Integration

Before installation, verify mounting dimensions, connection requirements, electrical specifications where applicable, pneumatic conditions and available clearance. During commissioning, confirm that the selected component operates correctly within the machine sequence and that associated fittings, tubing, wiring and sensing components are compatible with the chosen model.

Selection and Maintenance Guidance

For procurement and replacement, retain the complete model designation rather than selecting only by the broad product category. This is particularly important when suffixes identify electrical, sensing, mounting or other configuration details. Keeping the complete designation in maintenance records helps prevent substitution with an incompatible variant.

Power supply24VDC ±5%
Consumption currentApproximately 70 mA
Output voltageApproximately 2 (high-frequency type) kV
Ion balanceWithin ±15 (standard nozzle; 50 mm [2 in.] from nozzle tip; supply air pressure: 0.3 MPa [44 psi.])
Mediumclean air, water vapor and oil removed
Operating air pressure range0.05~0.5 [7~73] MPa [psi]
Mass60 [2.12] g
Product familyDTRY-ELK
Shop by category
Category

Browse product families and jump into the exact catalog section you need.

Product categories