IFM AC570A is an AS-Interface AirBox featuring a 5/3 closed pneumatic valve and four digital inputs. It is designed for decentralized pneumatic control in industrial automation applications. The closed-center valve arrangement provides a defined neutral pneumatic condition for compatible actuator circuits. Its II 3D designation supports applications covered by the applicable hazardous-area certification. The integrated AS-i and pneumatic architecture helps simplify machine-side installation.
Explore performance details, construction highlights, applications, and technical information in one clear overview.
The 5/3 closed valve provides three switching positions with a closed center. This configuration can be useful where pneumatic actuator ports need to be isolated during the neutral state. It can support controlled stopping or holding strategies depending on the pneumatic circuit. Four digital inputs allow the machine controller to receive sensor feedback. Actual actuator behavior depends on the connected pneumatic system.
The II 3D designation indicates applicability to the relevant dust hazardous-area category. The product must be installed only under the conditions defined by its certification. Appropriate accessories, wiring and installation methods are required. Environmental limits must not be exceeded. The current manufacturer certificate should be reviewed before application.
AS-i communication allows decentralized exchange of control and feedback data. Quick mounting technology supports field-level installation. Diagnostic LEDs assist with commissioning and troubleshooting. The module can be positioned close to pneumatic actuators and sensors. This can reduce control cabinet wiring and improve machine modularity.
5/3 closed pneumatic valve
4 digital inputs
II 3D version
AS-Interface communication
Quick mounting technology
Digital sensor feedback
Closed-center pneumatic control
AS-i flat cable
Field installation
Diagnostic indication
Hazardous-area suitability subject to certification
Compact design
Machine-level control
Reduced wiring
Industrial automation
Pneumatic cylinder systems
Dust hazardous environments
Packaging equipment
Process machinery
Assembly systems
Material handling
Machine automation
Actuator feedback
Factory automation
Distributed pneumatic control
| Specification | Details |
|---|---|
| Product Code | AC570A |
| Product Family | AirBox |
| Product Type | Pneumatic AS-i module |
| Valve Type | 5/3 closed |
| Digital Inputs | 4 |
| Input Type | Digital |
| Hazardous Area | II 3D |
| Certification | Refer current certificate |
| Communication | AS-Interface |
| Mounting | Quick mounting |
| AS-i Connection | Flat cable |
| Addressing | AS-i |
| Diagnostics | LED |
| Pneumatic Function | Directional control |
| Sensor Interface | Digital |
| Installation | Field |
| Protection | Refer datasheet |
| Housing | Industrial |
| Material | Manufacturer specification |
| Pressure | Refer datasheet |
| Flow | Refer datasheet |
| Pneumatic Connection | Refer datasheet |
| Dimensions | Refer datasheet |
| Weight | Refer datasheet |
| Manufacturer | IFM electronic |